Guidance on using and maintaining lifting equipment
31 May 2023
Photograph: David Calvert / Alamy Stock Photo
The HSE report that lift trucks are involved in about a quarter of all workplace transport activities. Our expert team has put together a quick guide on what the law says on maintaining your lifting equiment.
The LOLER (Lifting Operations and Lifting Equipment Regulations) 1998 deals with specific hazards and risks associated with lifting equipment and lifting operations and places a duty on individuals and businesses who own and operate lifting equipment.
This legislation covers any equipment used for working at height including:
Essentially, any equipment that is involved in the operation concerned with lifting and lowering of a load falls under LOLER.
The load is defined as anything that is being moved by the lifting equipment, including persons and objects.
Appropriate training should be completed in the use of any lifting equipment, which should be refreshed at a minimum of every 5 years. Most trainings provide a renewal date when refresher training should be completed by.
Exemptions under LOLER:
How often does my lifting equipment need to be inspected?
The NFU recommends that inspectors registered with the United Kingdom Accreditation Services complete the inspection, and records of each inspection should be kept.
For lifting equipment involved in lifting persons and any lifting accessories, these should be inspected at least every 6 months.
For all other lifting equipment, these should be inspected at least every 12 months.
The one exception is that if the equipment is purchased brand new and unused, the first inspection is not deemed necessary as the equipment must be up to relevant standards at point of sale. After this the above timelines apply.
Additional inspections should be completed if the lifting equipment is out of use for long periods of time, becomes damaged or if modifications are completed that could affect the equipment's integrity.
Thorough maintenance of the equipment should be completed ahead of each inspection. This may help to ensure fewer defects are detected during the inspection.
What happens during an inspection?
The inspector will review and assess the relevant machinery and equipment. If any defects are found they will be categorised according to the severity, with "immediate defect" being the most severe.
If the inspector identifies an "immediate defect", legally this must be reported to HSE, regardless of whether the defect is immediately fixed.
If one or more defects are found, and depending on their severity, depends on what the outcome may be. If deemed necessary, anything from a fine to prosecution could occur.
Farm safety
Health and safety: principles for farmers and growers
HSE injury stats – simple solutions to protect you on farm
Once you have submitted your query someone from NFU CallFirst will contact you. If needed, your query will then be passed to the appropriate NFU policy team.
By completing the form with your details on this page, you are agreeing to have this information sent to the NFU for the purposes of contacting you regarding your enquiry. Please take time to read the NFU's Privacy Policy if you require further information.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
NFU CallFirst